It is recommended to use the power-assisted mode during the uphill process. Do not use the pure electric mode, otherwise the controller will easily burn out. Thank you very much for your cooperation. We will reply to each customer's message as soon as possible, and we will not let you wait too long.
Easy to convert, DIY rear wheel electric bicycle conversion kit, suitable for bicycles with a rear drop size "170mm or 190mm", easily convert your pedal bicycle to motorized bicycle within 1 hour. This snowmobile rear-drive motor is compatible with disc brakes, which provides ideal power for the vehicle. Powerful and efficient, this motor greatly improves ride comfort. Super high cost performance, efficiency =80%; the brake lever safely cuts off the power of the motor.Equipped with all necessary accessories. Rear wheel and motor, controller, display (optional), brake lever, thumb throttle, PAS, controller package. Pure electric mode & human body riding mode & assist & push mode. The 4 working modes can be switched at will.
Bicycles compatible with 170mm or 190mm rear forks of snowmobiles and ATVs. Before installing the motor, please follow the steps in the manual to connect the motor to see if the motor can work normally. Our motors are suitable for disc brakes. We do not recommend that you install a motor kit on a carbon fiber bicycle. Please notice the ATTENTION information below? Wheel: Front wheel or Rear (Cassette need pay extra 10 dollars). Wheel size :20inch 26inch(leave message when you order).Throttle:Half Twist Throttle, Thumb Throttle, Twist Throttle (Depend the type you choose). Its not optional and can't change parts, Please leavea message to confirm the wheel size agianafter you place an order? 48V 1500W, 26inch, LCD3 Rear wheel. Its not optional and can't change parts, Please leavea message to confirm the wheel size agianafter you place an order??
72V 3000W, 26inch, Rear wheel. Noted: Conversion Kit not include Battery, tire, tirque arm, disc brake.
Motor wheel(Front or Rear) 1. 115PDD Power cut-off Brake lever 1. KT-BZ-4(8) 8 Magnet Pedal Assistant Sensor 1.Gifts: 1 Controller Bag(not battery) +1Install cable ties and stretch film+1Installation Manual+Flywheel(Only in the Rear)Gifts: 1 Controller Bag(not battery) +1Install cable ties and stretch film+1Installation Manual+Flywheel(Only in the Rear). 48V 1000W Fat Bike Rear Hub Motor 48V 1500W Fat Bike Rear Hub Motor 72V 3000W Fat Bike Rear Hub Motor. About 7.7kg about 10.1kg. Controller Type:KT-Brushless Motor Controller. 1500W use KT 35A controller.
3000W use KT 50A controller. About 180cm (SM) including the connector. 12V, 24V, 36V, 48V, 52V, 60V, 72V. 180cm(70.87in)SM plug.
KT-BZ-4(8) Pedal Assistant Sensor. 115PDD E-brake Cut Off Power. 12V 24V 36V 48V 60V 72V. 2 Pin SM Plug aboout 180cm including the connector. High quality steel, Hollow out design, super light weight. 30-50A Controller Bag For Elevtric Bicycle. Front Dropout:135-142mm rear rotate dropout:170mm rear cassette dropout:190mm.Rear rotate dropout:170mm rear cassette dropout:170mm. Rear rotate dropout:170mm rear cassette dropout:170/190mm.
Rear rotate dropout:170mm rear cassette dropout:170/190m. If your address is in a remote area, additional costs will be incurred, which are paid to the transportation company. We are very happy to see that customers like our products. This is due to official logistics factors that caused you to receive the damaged product.
Your satisfaction and recognition of our products is very important. It will be very good if you leave us a 5-star feedback. Finally, I sincerely wish all buyers a happy shopping and a happy life. This item is in the category "Sporting Goods\Cycling\Bicycle Components & Parts\Electric Bicycle Components".The seller is "shoes_stores2020" and is located in this country: CN. This item can be shipped worldwide.