[Simple installation]Easy to convert, DIY rear wheel electric bicycle conversion kit, suitable for bicycles with a rear drop size "190mm", easily convert your pedal bicycle to motorized bicycle within 1 hour. This snowmobile rear-drive motor is compatible with disc brakes and has a rated power of 1000W, which provides ideal power for the vehicle. Powerful and efficient, this motor greatly improves ride comfort. [Powerful]Super high cost performance, speed can reach 40-45 KMH, 372-433RPM, efficiency =80%; the brake lever safely cuts off the power of the motor.
[Complete Accessories]Equipped with all necessary accessories. Rear wheel and motor, controller, display, brake lever, thumb throttle, PAS, controller package. The 4 working modes can be switched at will. [Universal Compatible]Bicycles compatible with 190mm rear forks of snowmobiles and ATVs.
[Installation Manual] Before installing the motor, please follow the steps in the manual to connect the motor to see if the motor can work normally. [Applicable to]Our motors are suitable for disc brakes.
[Not recommended]We do not recommend that you install a motor kit on a carbon fiber bicycle. Our motor kits are mainly transported byChina-Europe Railway + UPS/DPD special line, and some countries/regions use online transport. Easy to convert wheel Electric Bike conversion kit for bicycle withrear rotate fork size "190mm" Flywheel is = 9 Speeds(rear cassette fork size "190mm" Flywheel is 8 Speed). Easily convert your bike into a motorized bike within 2-hour.
Stable Drive System, This motor wheel, which is compatible with the disc brake and V-brake, has a rated power of 1000W, providing ideal power for vehicles. Strong and efficient, this motor greatly enhances riding comfort and is suitable for touring bikes, commuter bikes and mountain bikes.
Super Cost-Efficient, speed up to 40-45 Km/h, torque up to 372-433 RPM; Brake Levers cut off the power supply to the motor safely. Complete Accessories, comes with all necessary accessories.
Motor wheel, controller, brake lever, thumb throttle, controller bag, display (optional), pedal assist sensor. Q:How do I know if this hub drive motor fits for my bike? Rear Cassette hub motorfits for the bike withrear fork size"190mm" DC type fits for 8 speed cassette flywheel. Q:Can I install the motor as soon as I receive it? A:Before installing the motor, please follow the steps in the manual to connect the motor to see if the motor can work normally.
The color of the rim can be changed, if you need to change the color of the rim, please leave a message to tell me the color you need (These options are free). Model: Brushless Non-gear Hub Motor. Rim wheel: Spoked with double-wall Aluminum alloy rim with 36 nuts, stainless steel spokes.
Wheel size: 20" / 26". Rear fork: Rear Cassette 190mm.
Max Torque: 59-60.3 N. Operating Temperature: -20 -- 45? Brand:KT(Kunteng) 30A Controller. Cable length:all about 13-15cm.Rated voltage:DC36V / 48V. Low voltage protection:DC30/40±0.5V. 1 PCS 48V 1000W Rear Hub Motor with Rim. 1 PCS KT LED LCD Display. 1 PCS PAS Sensor KT-BZ-4(8).
1 Pair Brake Levers(We default to shipBrake Levers, it can be changed to Brake Sensors if you need). 1Install cable ties and stretch film. Fat tire: 20inch 26inch 4.0. Fat tire motor rims: 80mm wide.This item is in the category "Sporting Goods\Cycling\Bicycle Components & Parts\Electric Bicycle Components". The seller is "outdoor_2020" and is located in this country: CN. This item can be shipped worldwide.