48V 1500W Eletric Bike Conversion Kit Rear Rotate Hub Motor Wheel for 20/26 Inch

48V 1500W Eletric Bike Conversion Kit Rear Rotate Hub Motor Wheel for 20/26 Inch

48V 1500W Eletric Bike Conversion Kit Rear Rotate Hub Motor Wheel for 20/26 Inch
Snowbike Motor Conversion Kit characteristics. [Simple installation]Easy to convert, DIY rear wheel electric bicycle conversion kit, suitable for bicycles with a rear drop size "170mm", easily convert your pedal bicycle to motorized bicycle within 1 hour. This snowmobile rear-drive motor is compatible with disc brakes and has a rated power of 1500W, which provides ideal power for the vehicle. Powerful and efficient, this motor greatly improves ride comfort.

[Powerful]Super high cost performance, speed can reach 45-50KMH, 414-487 RPM, efficiency =80%; the brake lever safely cuts off the power of the motor. [Complete Accessories]Equipped with all necessary accessories.

Rear wheel and motor, controller, display, brake lever, thumb throttle, PAS, controller package. The 4 working modes can be switched at will. [Universal Compatible]Bicycles compatible with 170mm rear forks of snowmobiles and ATVs.

[Installation Manual] Before installing the motor, please follow the steps in the manual to connect the motor to see if the motor can work normally. [Applicable to]Our motors are suitable for disc brakes. [Not recommended]We do not recommend that you install a motor kit on a carbon fiber bicycle. This snowmobile conversion kit has certain requirements for the bicycle frame.

The rear fork of the bicycle frame is required to be 170mm open. The color of the rim can be changed, if you need to change the color of the rim, please leave a message to tell me the color you need (These options are free). We will put the installation manual in the box. And we will give you a controller bag as a gift!!

1 PCS 48V 1500W Rear Rotate Hub Motor with Rim. 1 PCS KT-35A Sine wave Controller.

1 PCS KT LCD LED Display. 1 PCS PAS Sensor KT-BZ-4(8). 1 Pair Brake Levers(We default to shipBrake Levers, it can be changed to Brake Sensors if you need). 1Install cable ties and stretch film. Model:48V1500W Fat Bike Rear Hub Motor. Wheel Diameter (Inch): 20"/26"---Optional. Motor weight (kg): about 8. Package weight (kg): about 12.

Number of magnet poles: 46. Cable length :all about 13-16cm.

Low voltage protection :DC48±0.5V. This item is in the category "Sporting Goods\Cycling\Bicycle Components & Parts\Electric Bicycle Components". The seller is "outdoor_2020" and is located in this country: CN.

This item can be shipped worldwide.


48V 1500W Eletric Bike Conversion Kit Rear Rotate Hub Motor Wheel for 20/26 Inch