Snow Fat E-Bicycle Conversion Kit 36V 48V 500W Rear Cassette Hub Motor Wheel
[Simple installation]Easy to convert, DIY front wheel electric bicycle conversion kit, suitable for bicycles with a rear drop size "190mm", easily convert your pedal bicycle to motorized bicycle within 1 hour. This snowmobile rear-drive motor is compatible with disc brakes and has a rated power of 500W, which provides ideal power for the vehicle. Powerful and efficient, this motor greatly improves ride comfort. [Powerful]Super high cost performance, speed can reach 32KMH, 289-346RPM, efficiency =80%; the brake lever safely cuts off the power of the motor. [Complete Accessories]Equipped with all necessary accessories. Rear wheel and motor, controller, display (optional), brake lever, thumb throttle, PAS, extension cable, controller package. [Four riding modes]Pure electric mode & human body riding mode & assist & push mode.
The 4 working modes can be switched at will. [Universal Compatible]Bicycles compatible with 170mm rear forks of snowmobiles and ATVs.
[Installation Manual] Before installing the motor, please follow the steps in the manual to connect the motor to see if the motor can work normally. [Applicable to]Our motors are suitable for disc brakes. [Not recommended]We do not recommend that you install a motor kit on a carbon fiber bicycle. [DDP Service]The following countries include DDP service.(Russian Federation, United States, Canada, Ukraine, South Korea, Germany, France, Spain, Netherlands, Italy, Bulgaria, Belgium, Latvia, Poland, Denmark, Finland, Portugal, Sweden, Slovakia, Slovenia, Greece, Hungary, Czech Republic, Lithuania, Luxembourg, Romania, Ireland, Estonia, Austria, Croatia, Australia). Model:36V 48V 500W Fat Bike Rear Hub Motor. Wheel Diameter (Inch): 20"/26"---Optional. Rated Voltage (DCV): 36 48.
Motor weight (kg): about 3.98. Package weight (kg): about 8. Rear drive shaft diameter (mm): M12.
Moment arm-front drive (mm): M14. Number of magnet poles: 20. Cable length :all about 13-15cm. Low voltage protection :DC30/40±0.5V.1 PCS 500W Rear Hub Motor with Rim and Spokes. 1 PCS 500W Motor Controller. 1 PCS Display(LCD3, LCD5, LCD8H, LED880 option). 1 Pair Brake Levers(We default to shipBrake Levers, it can be changed to Brake Sensors if you need). 1 PCS Motor Extension Cable.
Gifts: 1 Controller Bag(not battery) + 1 Disc brake+1Torque Arm+1Install cable ties and stretch film+1Installation Manual.